In development for more than four years, the VP9 is Heckler & Koch’s latest handgun and the first striker fired HK since the renowned P7 series pistols were introduced in the 1980s.
Experience gained by HK engineers with the recent P30 pistol had a direct influence on the design of the VP9, but the VP9 breaks new ground with its integration of a unique striker firing system with an enhanced HK “light pull” trigger. The net result is trigger quality unequaled in any production striker fired handgun.
HK pioneered the first striker fired handguns, producing both the VP70 and P7 series, designs that impacted several models by HK competitors. But a superior trigger has eluded most striker fired pistol designs. The VP9 trigger surpasses those found on competitors. It has a short, light take-up with a solid, single action type break followed by a short positive reset.
The VP9 trigger has a consistent pre-travel pull with a positive wall/crisp break. Typically, striker fired guns have a pre-travel pull that increases in weight as you go through the trigger stroke. With the VP9, you have a less than noticeable pre-travel pull until the trigger reaches the engagement point of the fire control parts prior to trigger break.
The VP9 uses HK’s ergonomic handgun grip design that includes three changeable backstraps and six side panels— accommodating all hand sizes. Molded finger grooves in the front of the pistol’s grip also instinctively position an operator’s hand for optimal shooting. Only HK handguns have such a customized grip.
Although influenced by other HK models, the VP9 has all the hallmarks of the latest, state-of-the-art handgun. All controls are completely ambidextrous. Slide releases are present on both sides of the frame and the magazine release can be easily activated by left- or right-handed shooters.
A new feature is HK’s patented charging supports — simple components that are mounted on each side of the rear of the slide and provide better gripping leverage for racking the slide rearward. The charging supports speed reloading and make operating the VP9 easier for shooters with reduced hand strength. The VP pistols uses the proven P30 steel magazine; 15 and 10-round capacity available.
The VP9 has an extended Picatinny MIL-STD-1913 rail molded into its polymer frame for mounting lights and accessories. The rail has been tested and certified to handle mounted accessories up to 5.6 ounces.
The VP9’s proprietary captive flat recoil spring helps reduce the recoil forces effecting the operator and the handgun, improving shooter control during rapid firing and prolonging component service life.
HK’s famous cold hammer forged barrel — made from cannon grade steel — ensures long service life. Similar HK barrels on 9 mm P30 models have fired more than 90,000 rounds in endurance tests in 2010. The polygonal bore profile, with no traditional lands-and-grooves rifling, contributes to longer service life as well as a slight increase in muzzle velocity.
The VP9’s machined steel slide is protected from corrosion and wear by HK’s hostile environment finish and all metal components, including springs and pins have superior metallurgy.
VP pistols are made in Heckler & Koch’s Oberndorf factory in southwest Germany. The VP9 is well-suited for civilian sport shooting, security, military, and law enforcement use.
|Manufacturer||Heckler & Koch|
|Number of Mags||No|
|Available for In-Store Pickup||Yes|
How to Buy a Firearm or Ammunition
Federal firearms laws prevent the sale of a weapon from Red Dot Arms, LLC. directly to an individual in another state (we are located in Illinois). We must ship your firearm directly to an FFL Dealer near you. The steps to follow are:
- Order your firearm online using our secure shopping cart. If you know the FFL dealer you are going to use at time of order placement (not a requirement) enter his name and address into the 'Ship To' field.
- Find an FFL dealer near you that will accept the transfer of the firearm for you. Most sporting goods stores and pawn shops will provide this service for a small fee. Also, gun clubs, shooting ranges, etc. may provide this service to you. If you don't know which FFL dealer to use in your area, put a comment in your order and we will help you locate one near you. We have access to a large list of dealers in the USA that will gladly handle a transfer for you. Most dealers charge around $25 for a transfer. You must confirm the transfer with your local FFL dealer in advance.
- Next, have the dealer send us a copy of his signed license if we don't already have it on file. To check whether a license is on file, contact us. Please Note: It is now legal for us to accept a faxed or e-mailed copy of your dealers license!
- Make sure the dealer knows the firearm is coming from Red Dot Arms. If you used a dealer that we already have on file, call him to let him know that a gun for you is on the way.
- We will send you an email when the firearm ships, which will include a tracking number.
If an item is available for Backorder, you can still ADD it to your Cart, and place the order. Typically, items on Backorder require between 6-10 Weeks before fullfillment. If you have multiple products in your Cart during checkout, items that are IN STOCK, will ship first and your Backordered products will ship seperately.
Red Dot Arms will notify you via email when your Backordered item is fullfilled. At anytime, you can also login to your Account for shipping status.
Due to the nature of the current market landscape, certain items are in high demand. By placing a Backorder, it ensures that you will be at the top of the list when HOT items become available on the Red Dot Store.
Will My Credit Card Be Charged for a Backorder?
No. Your credit card and the purchase amount will only be charged at the time of order fullfillment.